HUNGRY HOWIE’S PARTNERING WITH JD MOTORSPORTS AND ROSS CHASTAIN FOR THE LTI PRINTING 250

HUNGRY HOWIE’S PARTNERING WITH JD MOTORSPORTS AND ROSS CHASTAIN FOR THE LTI PRINTING 250

FLEX Seal Original.png

GAFFNEY, SC (June 7, 2018) – Hungry Howie’s, home of the Original Flavored Crust® Pizza, and the Flex Seal® Family of Products, Home of the Original Liquid Rubber In a Can, will be partnering with team JD Motorsports with Gary Keller and Ross Chastain, driver on the No. 4 Flex Seal Chevrolet Camaro, this weekend at Michigan International Raceway (MIS).

Chastain will be pulling double duty this Friday, June 8th, as a racecar driver and pizza delivery driver. Prior to the NASCAR Xfinity Series LTi Printing 250 practice, Chastain will be hand delivering Hungry Howie’s pizza to the NASCAR FOX crew. Later in the day, Chastain will be visiting the MIS campgrounds delivering fresh pizzas to the fans after the Monster Energy NASCAR Cup Series qualifying. The Flex Seal® team will be joining in on the campground pizza party, giving away Limited-Edition samples of their Brand-New Product, Flex Tape™ CLEAR.
 
“If there’s one thing that NASCAR fans can appreciate, it’s good pizza” said Chastain. “I’ll definitely be everyone’s favorite driver when I show up at the campground with fresh Hungry Howie’s pizzas. I’m very excited to have these partnerships for the weekend in Michigan and for everything we have planned with these guys and the Flex Seal® team.”

Ludington, MI, franchise owner Pat Patterson along with franchise owner Jeff Hart of the Brooklyn, MI, Hungry Howie's Pizza will be providing pizzas to 50 lucky NASCAR fans. “We are excited to team up with JD Motorsports and No. 4 Ross Chastain to deliver Hungry Howie’s Flavored Crust Pizza to the fans!” said Patterson.

ROSS CHASTAIN ON A ROLL HEADING TO MICHIGAN INTERNATIONAL SPEEDWAY

ROSS CHASTAIN ON A ROLL HEADING TO MICHIGAN INTERNATIONAL SPEEDWAY

Gaffney, SC (June 7, 2018) – After a strong run last weekend at Pocono Raceway, Ross Chastain is optimistic for Saturday’s NASCAR Xfinity Series LTi Printing 250 at Michigan International Speedway.

The Flex Seal® Family of Products, Home of the Original Liquid Rubber In a Can, will once again be the primary sponsor on board Chastain’s No. 4 JD Motorsports with Gary Keller Chevrolet Camaro.

“It’s a major confidence boost to be racing the same car that we had a great race with last weekend,” said Chastain. “We were able to run with the lead pack of cars and finish 11th last week at Pocono, so there’s no reason why this weekend should be any different. Hopefully we’ll be able to put the Flex Seal Chevy in the top-ten.”

NASCAR Xfinity Series practice is scheduled for 1:05 p.m. and 3:05 p.m. ET Friday. Qualifying will start at 10:05 a.m. on Saturday, and the LTi Printing 250 will get the green flag at 1:30 p.m. ET on FOX.

VINNIE MILLER CAN’T WAIT TO RACE HIS HOME TRACK, MICHIGAN INTERNATIONAL SPEEDWAY

VINNIE MILLER CAN’T WAIT TO RACE HIS HOME TRACK, MICHIGAN INTERNATIONAL SPEEDWAY

Gaffney, S.C. (June 7, 2018) – Vinnie Miller is excited to be back in his home state of Michigan for this Saturday’s LTi Printing 250 at Michigan International Speedway (MIS). Michigan-based company and multi-race sponsor, JAS Expedited Trucking will once again be on board Miller’s No. 01 JD Motorsports with Gary Keller Chevrolet Camaro.

Miller, a rookie in the NASCAR Xfinity Series, had a very successful race at MIS last year in the ARCA Racing Series presented by Menards (ARCA) in which he started the race in second place, led three laps, and finished in the top-ten.

“I can’t wait to get back to Michigan International Speedway,” said Miller. “It is always nice to be home and have so many family and friends in attendance. It also puts some pressure on me as a driver, but I’m confident that the JD Motorsports team will have a fast Camaro ready for Saturday. Michigan is a fast track; you really have to be on your toes and be ready for anything to happen. I’m just excited that my sponsors, JAS Expedited Trucking based in Lapeer, MI, and my family’s company, Master Mfg., Inc. (Oxford, MI) will be on the No. 01 Camaro for the Xfinity Series race this weekend. Without them I wouldn’t be able to live my dream. Hopefully, we’ll be able to bring home a solid finish for them and JD Motorsports.”

NASCAR Xfinity Series practice is scheduled for 1:05 p.m. and 3:05 p.m. ET Friday. Qualifying will start at 10:05 a.m. on Saturday, and the LTi Printing 250 will get the green flag at 1:30 p.m. ET on FOX.

GARRETT SMITHLEY READY FOR THE LTI PRINTING 250

GARRETT SMITHLEY READY FOR THE LTI PRINTING 250

Gaffney, S.C. (June 7, 2018) – This weekend at Michigan International Speedway will be one to remember for Garrett Smithley. Smithley, driving the No. 0 VehicleKEYS.com Chevrolet Camaro, is hoping to bring home a great finish in Saturday’s NASCAR Xfinity Series LTi Printing 250, before making his Monster Energy NASCAR Cup Series debut on Sunday.

VehicleKEYS.com, a new online source for aftermarket key fobs for all major vehicle makes and models, will once again be on board Smithley’s No. 0 JD Motorsports with Gary Keller Chevy. This will be the third race of the year for VehicleKEYS.com.

“This is going to be a huge weekend for me,” said Smithley. “Even though I’m making my Monster Energy Cup Series debut this weekend, I’m very focused on continuing the great season that my ‘Number Nuthin’’ NASCAR Xfinity Series is having. We struggled a little bit last weekend with the new aero package, but my JD Motorsports guys have worked all week in the shop to figure it out. We’ve got a great game plan for the weekend, and I think it’s going to be a great race for me and VehicleKEYS.com.”

NASCAR Xfinity Series practice is scheduled for 1:05 p.m. and 3:05 p.m. ET Friday. Qualifying will start at 10:05 a.m. on Saturday, and the LTi Printing 250 will get the green flag at 1:30 p.m. ET on FOX.

MATT MILLS READY FOR HIS FIRST RACE AT MICHIGAN INTERNATIONAL SPEEDWAY

MATT MILLS READY FOR HIS FIRST RACE AT MICHIGAN INTERNATIONAL SPEEDWAY

Gaffney, SC (June 7, 2018) – NASCAR Xfinity Series rookie driver, Matt Mills will be making his first start at Michigan International Speedway (MIS) piloting the No. 15 JD Motorsports with Gary Keller Chevrolet Camaro in Saturday’s LTi Printing 250.

The NASCAR Xfinity Series will be using the same aero package at MIS that was used last weekend at Pocono Raceway. Mills ran a solid race at Pocono and finished with a clean racecar, so the No. 15 team will be bringing the same car this weekend.

“Michigan is going to be a challenge, but I feel ready for it after last weekend,” said Mills. “Last Saturday’s race at Pocono was one of the strongest races that I’ve had this year, so I have a great feeling about this weekend’s race with the same car and aero package.”

NASCAR Xfinity Series practice is scheduled for 1:05 p.m. and 3:05 p.m. ET Friday. Qualifying will start at 10:05 a.m. on Saturday, and the LTi Printing 250 will get the green flag at 1:30 p.m. ET on FOX.

ROSS CHASTAIN FINISHES 11TH IN THE POCONO GREEN 250

ROSS CHASTAIN FINISHES 11TH IN THE POCONO GREEN 250

GAFFNEY, S.C. (June 4, 2018) – Ross Chastain and team JD Motorsports with Gary Keller ran another impressive race in Saturday’s Pocono Green 250. The No. 4 Flex Seal Chevrolet Camaro came home in 11th place at Pocono Raceway.

Chastain advanced to the final round in NASCAR Xfinity Series qualifying and started the race in 12th place. The No. 4 Flex Seal Chevy consistently ran in the top-15 throughout the entire race.

“The car was good all day,” said Chastain. “We swung a lot at it after practice, and it was all in the right direction. The great thing about the new aero package that the Xfinity Series used this weekend is that you can be creative in how you set up the car. We’ll be taking this same car to Michigan next week with the same aero package, so we should be able to finish just as good there. I can’t say ‘thank you’ enough to my No. 4 crew for all of their hard work and to Flex Seal for the support.”

Next up for the NASCAR Xfinity Series is the Michigan 250 at Michigan International Raceway on June 9th, 2018.

GARRETT SMITHLEY FINISHES 26TH AT POCONO RACEWAY

GARRETT SMITHLEY FINISHES 26TH AT POCONO RACEWAY

GAFFNEY, S.C. (June 4, 2018) – Garrett Smithley, driver of the No. 0 JD Motorsports with Gary Keller Chevrolet Camaro, finished in 26th place in Saturday’s Pocono Green 250 at Pocono Raceway.

Smithley qualified in 37th place, but the No. 0 team improved the car during every pit stop. Smithley was able to work his way up to 26th place by the end of the NASCAR Xfinity Series race.

“We had a pretty decent race,” said Smithley. “We struggled with the new aero package, but my No. 0 JD Motorsports guys have some good ideas for Michigan next week. Big thanks to the Wheeling Nailers and Arbor Industrial for coming on board the car this weekend.”

Next up for the NASCAR Xfinity Series is the Michigan 250 at Michigan International Raceway on June 9th, 2018.

MATT MILLS FINISHES 27TH AT POCONO RACEWAY

MATT MILLS FINISHES 27TH AT POCONO RACEWAY

GAFFNEY, S.C. (June 4, 2018) – Matt Mills brought his No. 15 JD Motorsports with Gary Keller Chevrolet Camaro home in 27th place in Saturday’s Pocono Green 250 at Pocono Raceway.

In his first NASCAR Xfinity Series start at Pocono Raceway, Mills qualified in 31st place.

“This was a good day for my No. 15 team,” said Mills. “We improved all day, stayed out of trouble, and brought home a clean racecar. All in all, we had a solid race today, and I’m excited to be back next weekend in Michigan.”

Next up for the NASCAR Xfinity Series is the Michigan 250 at Michigan International Raceway on June 9th, 2018.

POCONO RACEWAY A LEARNING EXPERIENCE FOR VINNIE MILLER

POCONO RACEWAY A LEARNING EXPERIENCE FOR VINNIE MILLER

GAFFNEY, S.C. (June 4, 2018) – Pocono Raceway, often called the “Tricky Triangle,” proved to be a challenge for NASCAR Xfinity Series rookie driver, Vinnie Miller.

Miller’s No. 01 JD Motorsports with Gary Keller Chevrolet Camaro started the Pocono Green 250 in 30th place, and he finished in 31st place with a clean racecar.

“I really enjoy racing at Pocono, but the Tricky Triangle wasn’t my friend this weekend,” said Miller. “We just struggled all weekend with finding speed. During the race on the restart, the cars in front of me started checking up, and I pulled down before the start/finish line which gave us a drive-through penalty, rookie mistake by me. We had a flat tire and had to pit under green – which put us behind, as well.  Despite all that we still came home with a clean car for Michigan. I know that the JD Motorsports with Gary Keller team will have a stout No. 01 JAS Expedited Trucking Camaro ready for my home track, Michigan International Speedway next weekend.”

Next up for the NASCAR Xfinity Series is the Michigan 250 at Michigan International Raceway on June 9th, 2018.

ROSS CHASTAIN PLANS TO MASTER THE TRICKY TRIANGLE

ROSS CHASTAIN PLANS TO MASTER THE TRICKY TRIANGLE

Gaffney, S.C. (May 31, 2018) – Ross Chastain hopes to add Saturday’s Pocono Green 250 at Pocono Raceway to his growing list of impressive finishes in 2018. Longtime sponsor, Flex Seal will once again be on board Chastain’s No. 4 JD Motorsports with Gary Keller Chevrolet Camaro.

Eleven races into the 2018 NASCAR Xfinity Series season, Chastain has three top-ten finishes and eight top-20 finishes so far.

“The way that this season has been going so far, I’m feeling great about Pocono,” said Chastain. “We had some carburetor problems last weekend that cost us a great finish, but my No. 4 team got that all figured out this week. I’m really excited to run the new aero package at Pocono, and I think it will be a great weekend for us.”

NASCAR Xfinity Series practice is scheduled for 1:05 p.m. and 3:05 p.m. ET Friday. Qualifying will start at 9:05 a.m. on Saturday, and the Pocono Green 250 will get the green flag at 1:00 p.m. ET on FS1.

About Flex Seal

Flex Seal is a watertight, flexible coating. Flex Seal sprays out a liquid that seeps into cracks and holes, and dries to a rubberized coating. Flex Seal seals out water and lasts for years! Once dry, Flex Seal can be painted any color. Flex Seal® is excellent for roof leaks, gutters, skylights, windowsills, PVC pipes, flashings, duct work, foundations, awnings, chimneys, downspouts, and so much more! Visit www.flexsealproducts.com!